windshield protection

Have you ever had a flat tire and had to call a tow truck to fix it? Worried of getting stranded with a flat tire? These instructions will teach you how to safely and admittedly put on a spare tire. You should have all the required items in your trunk.

What you will need:

Wind Shield

- A car jack

- Spare tire

- A lug nut wrench (tire iron)

Step 1 – Make sure you are parked in a safe place. Also ensure that you have the parking brake and hazard lights on.

Step 2 – Get out all of the above items from your trunk.

Step 3 – Loosen the lug nuts with the lug nut wrench in a star pattern.

Step 4 – Safely jack up your car. A safe place is commonly everywhere on the frame, any way check the owner’s manual for recommended locations. Jack it up a puny bit higher than is needed for the flat tire because when you place the spare on it will need to be higher than the flat tire.

Step 5 – Take all lug nuts off, remove flat tire and replace with spare tire. Make sure you place the lug nuts in a safe location where they will not roll away or get lost.

Step 6 – Replace the lug nuts and hand tighten them. Tighten them in a star pattern just as you loosened them.

Step 7 – gradually lower the jack and remove it from underneath the car.

Step 8 – Tighten the lug nuts as much as you possibly can.

Step 9 – Safely put all the items back into your trunk.

This is a safe and easy formula to replace a flat tire with a spare. You should also be able to find these instructions in your owner’s manual. After following these instructions, be sure to supervene the guidelines for driving with a spare tire. You’ll be back on the road in no time!

How to Put on a Spare Tire

Visit : Earning host Customer service Dealer Tire sales Interactive PDA

Comments are closed.